Press the learning key, the indicator light off, indicating that it enter the learning state, and then release the learning button, press any button on the remote control, the indicator light flashes four times and then stays on, indicating that the learning is successful.
Clearing Code:
Press and hold the learning key for 4 seconds, the indicator light turns from off to on, indicating that the code is cleared successfully, and all remote control codes are cleared.
Switching Working Mode:
1. Momentary: 1.2 to the OFF position
2. Toggle: 1 to ON, 2 to OFF
3. Latched: 1 to OFF, 2 to ON