large suitcase 220v single-channel learning resistance-capacitance step-down remote control switch
jog, self-locking, interlocking
Learning to match code (It can learn fixed code and learning code chip remote control)
circuit board 46mmⅹ38.5mmⅹ17mm shell 42*50*27mm
This single-channel remote control switch has a working voltage of 220 V and uses a 10A relay; resistance-capacitance step-down design, with learning function to learn multiple remote controllers; The working mode are jog, self-locking, interlocking mode, and adjustment through the area of jumper cap. The output mode has uncharged output and charged output for setting. The product has the characteristics of simple operation, flexible and arbitrary combination.
1. Working mode: Jog, self-locking, and interlocking three modes, which can be switched through the area of jumper cap.
2. Output mode: Charged output and uncharged output (output switch signal), which can be set by welding on the back.
3. Learning to match code: Independent learning button, which can be paired with the remote control, or clear the remote control which has been learnt.
Mainly used in lamps and lanterns electric door window household electrical equipment small power motor control and security industry and other fields.
Remote control learning method: After adjusting the working mode, press the controller learning button, the indicator light is off, indicating that it has entered the learning state; press and hold the remote control button that needs to be learned, the indicator light flashes 3 times and then stays on, indicating successful learning.
Code clearing: Keep pressing the controller button, and the indicator light will return to steady light after going out, indicating that the code clearing is successful.
Working mode setting method
A、Self-locking: Please plug the short circuit cap into T-G
B、Interlocking: Please plug the short circuit cap into L-G
C、Inching: Please hold the short circuit cap, no shorted
Working mode description
Inching: Press and hold the remote control, the corresponding relay is on; Release the remote control, the corresponding relay is off.
Self-locking: Press the remote control button, the corresponding relay is on; And press the other remote control, the relay is off.
Output mode setting method
Uncharged output: The back pad area is not shorted and disconnected.
Charged output: The back pad area is short-circuited and connected.
When switching the working mode, you need to perform a code clear operation to clear the learned remote control. Do not operate with power when wiring, carefully check whether the wiring is correct before turning on the power.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.