|Name EU smart socket|
|Support remote APP (Android & IOS) control; support timing and shareing control|
|Support grouping control; support sharing control; support Tmall spirit voice control|
|Input voltage 110V~240V|
|Load current 10A|
|WIFI type 2.4GHz 802.11b/g/n|
|Control distance 30M|
|Material fireproof PC|
|Packing 118g; 70*57*90mm|
REMOTE CONTROL PRODUCT USING INTRODUCTION
First, scan the QR code below, download the "Smart Life" application, install the registration login (if you need to use the Tmall Wizard control in the country, you can download the QR code "Graffiti smart" on the right).
CONNECT THE DEVICE AS SHOWN BELOW
Plug the remote control socket into the tripod jack or plug.
APP ADD EQUIPMENT
— Power on the device after installation is complete.
— Enter the application and click “+” in the upper right corner of the page to enter the device network connection page, as shown below.
— There are two network connections (normal mode and AP mode). Normal mode is the default mode, users can click the upper right corner to switch the connection mode to AP mode.
— Normal distribution mode input method: long press the operation button for about 5 seconds, the indicator light blue light of the control socket enters fast flashing (1 time per second), indicating that it enters the normal distribution network mode.
Note: If the indicator does not flash quickly, please release the operation button, re-operate, or quickly switch the device three times and operate again.
— After the remote control socket enters the normal distribution network mode, open the mobile phone APP to add the device, and follow the above prompts: 1. enters the WIFI to be connected; 2. connects the device. 3. added devices succeeded.
If the device is “offline” on the app, it will take a while (within 1 minute) to connect to your router and cloud server due to the network environment. When the APP device status is online, the device is in the "online" state. If the device is still "offline" on the App, please close the app and reopen it.
About access to third-party smart speaker control such as Tmall, amazon echo, Googel Home. Please refer to the instructions in the app.
REMOTE CONTROL SOCKET MANUAL BUTTON SWITCH FUNCTION DESCRIPTION
Short press the socket operation button, light red light, it means the socket power-on state, then short press the operation button once, the light goes out, it means the socket is powered off. A manual switch socket is now available.
press the socket operation button, the indicator light turns red, and then press and hold the operation button of the socket for 3 seconds. When the LED flashes blue, it indicates that the clear function has been completed, and the socket clears all the learned data stored by the device. The socket also enters the re-normal distribution mode.
Owners can share devices to other "Smart Life" accounts. When sharing devices, both should stay online in "Smart Life". Because if the account you want to share is not online, he/she will not receive the invitation message.
(Share account needs the other party also has an APP account)
How to achieve sharing?
First click on "Share", enter the "Smart Life" account (phone number or email address) you want to share, check the timer permissions you want to provide (edit/delete/change/enable), then click "Next" . Another account will receive an invitation message. Click Accept and the device has been successfully shared. Other users can access the control device.
The device has been successfully added, but the status is "offline"?
Answer: The newly added socket will take a while to connect to your router and the Internet. If you are offline for a long time, this means that the device cannot connect to the router. The reason may be that your device is too far away from the router, resulting in a weak Wi-Fi signal or no network. The device cannot be added to the 5G-wifi router, only 2.4G-wifi can. Finally, make sure your router is MAC open to allow other devices to join.
Why can't the APP find the device in the paired state?
Answer: Please turn off your phone's Wi-Fi and then reconnect to WIFI. Make sure that the remote control socket has entered the normal distribution mode, and the indicator light flashes quickly. If not, please re-operate the remote control socket.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.