Name: US smart socket
|Support remote APP (Android & IOS) control; support timing and shareing control|
|Support grouping control; support sharing control; support Tmall spirit voice control|
|Input voltage: 110V~240V|
|load current: 10A|
|WIFI type: 2.4GHz 802.11b/g/n|
|control distance: 30M|
|Material: fireproof PC|
|Packing: 75g; 58*58*55mm|
Connecting Your Plug to a Wi-Fi Network
Follow the on-screen instructions to register and login to set your smart home.
on the Apple App Store,Google Play,or scan
the QR code below and install it.
Follow the on-screen instructions to register
and log in to set up your smart home
1.Install the socket and power on
2.Press and hold the power key for 5 seconds(accordiing to the APP guide)to make the bluelight flash
3.Open the"Cloud Intelligence"APP,click"Add Device"or"+"in the upper right corner of the page,and select"Manual Add"(pic1)
4.Then select"Socket"to make sure the blue light flasher cyclically and confirm in the app(pic2)
5.Select the local WIFI and enter the correct password.(The device only supports2.4GHz WIFI),click"Next"(pic3)
7.Wait for the device to be added successfully
B.Nearby device mode
1.If the connection fails in "Easy Mode",please change to "Near Device Mode",the mode is on the "Add Device"page
2.Long press the power key for 5 seconds(according to the APP guide)to make the blue light flash,then the correspondingsocket to be added will appear in theApp,click"+"
3.Select the local WIFI and enter the correct password,click"Next"
5.Wait for the device to be added successfully
Contorl Your Smart Bulb with Alexa/Google Assistant
Before you start ,make sure that:
·Your smart bulb is connected with wifiand can be controlled by app.
·You have an Alexa-enabled device(i.e.Echo,Echo Dot and Amazon Tap)or a device enabled with Google Assistant(i.e.Google Home).
·The Amazon Alexa app or the Google home app which is already installed onyour smart device and you have createdan account.
To contorl your devices with Amazon Alexa:
Step 1:Open the Amazon Alexa"APP then find the "Skilis"button on the menu.press it.(pic 7)
Step 2:Search the "Cloud Intelligence"and choose the first one then Enable it.(pic 8~9)
Step 3:Select your country code and Enter your "Cloud Intelligence"APP Account and password,
then press the"Link Now"button.when the Account success to login press the"Done"button.(pic 10)
Step 4:Back to the menu,and press the "smart home"button,then choose the "Devices",then press the Discover button.(pic 11)
Step 5:Now you can use your Alexa to control your Smart devicees,enjoy yourself.
-Check if you have selected a 2.4 GHz wifi which is the same that your phone is con -nected with.(If your router is dual band,make sure your phone and the smart plug are connected to the 2.4 G signal.) -Check if you have entered the correct WiFi password. -Check if there are any internet problems.If necessary,reset your Wi-Fi router and try again.
-Check if there are any internet problems -Check if you have enabled"Cloud intellig-ence"in Alexa or Google APP. -Check if you are using proper commands when talking to Alexa/Google Assistant, repeat your question,speak clearly to Alexa/Google Assistant in English. -Check if you have modified the name of the plug in"Cloud Intelligence"app.If yes, you need to rediscover the devices through Alexa/Google app.
Please check if there is damage caused by transportation.If broken,please contact supplier for replacement.
Please follow the instruction and notice to keep product in a good and safe use condition.
Do not disassemble or reinstall the bulb.
-12-month limited warranty -Lifetime technical support
For any inquiries or comments concerning
this product,please do not hesitate to
contact the seller.
We appreciate your support!
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.